Thrust 30 Thrust 10 Thrust 20 Thrust 30 Thrust 10 Thrust 20

Thrust 30

Outside Diameter 37.2mm _______________________________________________
Length 37mm
Weight (gr/oz) 105.gr / 3.7oz
Motor Shaft Dia. 5.0mm
Mounting Bolts Dia. M3
Max efficiency Current A * 18-28A
Peak current A (15 sec) * 39A
Battery pack range ** 2~3 LiPo / 6-12 NiCd
Poles 14
KV rpm/V 905
Recommended ESC PA Quantum 40
Peak Watts 420 watts

* Unrestricted airflow and air scoops are mandatory to ensure long service life and long term performance consistency. Extended Continuous Operation without the required cooling provisions may be detrimental to the coils and magnets and will void warranty.

** PA 3cells (11.1V) 2200mAh pack is recommended.




Propeller selection

APC 11x5.5E Excellent lower range prop for the T30 with outstanding efficiency of over 82%!! Running cold and smooth

APC 12x6E Excellent overall propeller for 3D, aerobatics and pattern flying. Great thrust and very nice speed. This is our recommended prop for the Katana MD.

APC 13x4E If you are a thrust freak and want a 3D beast give this prop a shot. Producing over 85.3oz of thrust!! This prop will impress your club mates. Not a good choice for pattern due to the lower speed (low pitch prop).

APC 13x6.5E This is the higher range prop for the Thrust 30 and an excellent over all prop. Allow high speed manoeuvers with a lot of punch. Adequate airflow to cool down the motor and ESC is required as well as a good battery and throttle management.

We recommend getting a few different size propellers with your Thrust 30 motor. Swapping a propeller is an easy task so you may want to
experiment and feel the difference to fit different style of flying. Also in a hot summer day you may want to use a smaller propeller while in a cooler day you can run the motor with a larger propeller.

Videos